2021-2023 Jeep Gladiator 3.0L Ecodiesel Stage 2 Off Road Kit

This scalable off road stage 2 kit for the 2021-2023 Jeep Gladiator Ecodiesel includes all items required to complete an off road modification. 

Choose between a single tune file or multi map switch on the fly (SOTF)

Single Tune Files:

Econo (optimized stock)
Towing (30whp 50wtq)
Street (50whp 80wtq, not recommended for towing)
Race (80whp 140wtq, NOT to be used for towing)

SOTF can not be purchased if the vehicle has adaptive cruise control

If you want a transmission tune, select the trans tune adder with pg4.  

If you want to get multiple single tune files and flash via PG4 flash tool, please add the PG4 for engine only tuning adder.  If you are getting a transmission tune, you can simply select the transmission tune with pg4 adder.  This will be cheaper. 

PG4 can NOT flash SOTF files

Pg4 tuning Requires the engine ecu be shipped to us to be patched unless selecting a pre tuned ecu. 

If you do not want to send your stock ecu to us, please select the pre tuned ecu.  This will add a blank ecu which will get pre tuned and shipped to you.  Plug and play into the vehicle. A pre tuned ecu will have a red light in the evic. 

If you want to send us your stock ecu to clone to a blank ecu, please add the pre tuned ecu adder and in the VIN entry box type " sending stock ecu to clone "

ALL ECUS we tune receive the PG4 patch. 

Choose between the following exhaust options:

Aluminized steel race exhaust (connects to the factory axle back)  instructions included

T409 Stainless steel race exhaust (connects to the factory axle back)  instructions included

Full aluminized exhaust with a muffler (full exhaust from downpipe to tip) instructions included

304 stainless downpipe back exhaust with resonator or muffler. Or no resonator/muffler, lifetime warranty no instructions included

If you are going with the aluminized race pipe/T409 Race pipe orthe 304 downpipe exhaust, you can add an 304 stainless axle back exhaust if you want to replace the pipes from the axle to the tip. 

Removing the egr coolers is not mandatory, so if you want to remove them, add the EGR Kit adder. 

If you do not have a bypass cable or tazer to allow tuning via the OBD port and you want to tune via the obd port,  please select the bypass cable adder. 

You will receive an email with instructions based on what you order. 

All parts are subject to drop ship or manufacturer lead time.

Ecus are processed in 2-5 business days.