2020-2024 Ram/Jeep Ecodiesel Standard Stage 2 Tune

Stage 2 OFF ROAD tuning for your 2020+ third gen ecodiesel Ram or Jeep. 

You can select to send your ecu in for bench flash, purchase a pre tuned ecu where you do not send your ecu in (has the red light), or send your ecu in to be cloned to a pre tuned ecu ( no red light ). 

All tuned ecus receive the Power Gate 4 patch which allows tuning through the OBD port, so if you want to receive multiple power levels, you can add the power gate 4 flash tool to tune both engine and transmission.  security bypass cable required for OBD tuning

If you are ordering transmission tuning as well, you do not need to add the power gate 4 or the bypass from this page.  You can add them on the transmission tune item page.  There is a discount applied for doing so. 

If you are not ordering transmission tuning, you must add the power gate 4 and bypass adder found on this page. 

5 tune file options, you would select one file for bench flash, OBD tuning would get access to all files:

Stock 
Econo (optimized stock)
Towing (30whp 50wtq)
Street (50whp 80wtq, not recommended for towing)
Race (80whp 140wtq, NOT to be used for towing)

Stage 2 tuning requires at minumum a race exhaust or downpipe back exhaust kit.  Egr kit is strongly recommended. 

If selecting a pre tuned ecu, we require your VIN #.  A pre tuned ecu without cloning from the stock ecu will show a red security light in the evic. 

If you are sending us your stock ecu to be cloned to a pre tuned ecu, please put "sending stock ecu" in the vin entry slot.

If you are ordering transmission tuning as well, you do not need to add the power gate 4 or the bypass from this page.  You can add them on the transmission tune item page.  There is a discount applied for doing so. 

If you are not ordering transmission tuning, you must add the power gate 4 and bypass adder found on this page.